Buy Online lenovoshopping.in

Chennai Team: 9941959697 / 9841311311

Hyderabad Team: 9841094109 / 9841934193

Lenovo Warranty: 1-855-253-6686

Lenovo access point Details

Cisco Catalyst 9120 Series Access Point in Chennai, Hyderabad, Kerala, bangalore, andhra, India
Cisco Catalyst 9120 Series Access Point
  • Four radios: 2.4 GHz (4x4), 5 GHz (4x4), Cisco RF ASIC and BLE/IoT
  • Cisco Flexible Radio Assignment and Cisco CleanAir Technology
  • Internal and external antenna
  • Software
  • Cisco Unified Wireless Network Software Release 8.9.x or later
  • Cisco IOS XE Software Release 16.11 with AP Device Pack, or later
  • Supported wireless LAN controllers
  • Cisco Catalyst 9800 Series Wireless Controllers
  • Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller
  • 802.11n version 2.0 (and related) capabilities
  • 4x4 MIMO with four spatial streams
  • Maximal Ratio Combining (MRC)
  • 802.11n and 802.11a/g beamforming
  • 20- and 40-MHz channels
  • PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic Shift Diversity (CSD) support
  • 802.11ac
  • 4x4 downlink MU-MIMO with four spatial streams
  • MRC
  • 802.11ac beamforming
  • 20-, 40-, 80-, and 160-MHz channels
  • PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 DFS
  • CSD support
  • 802.11ax
  • 4x4 downlink MU-MIMO with four spatial streams
  • Uplink/downlink OFDMA
  • TWT
  • BSS coloring
  • MRC
  • 802.11ax beamforming
  • 20-, 40-, 80-, and 160-MHz channels
  • PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 DFS
  • CSD support
  • Interfaces: 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45)IEEE 802.3bz
  • Management console port (RJ-45), USB 2.0 3.75W (enabled via future software)
  • Indicators: Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
  • Dimensions (W x L x H)
  • Access point (without mounting brackets): C9120I: 8.5 x 8.5 x 1.7 (21.6 x 21.6 x 4.3 cm), C9120E and C9120P: 8.5 x 8.05x 2.0 (21.6 x 21.6 x 5.1 cm)
  • Weight: Cisco Catalyst 9120I, 2.87 lbs (1.3 kg)
  • Cisco Catalyst 9120E/P, 3 lbs (1.36 kg)
  • System memory: 2048 MB DRAM, 1024 MB flash
  • Warranty: Limited lifetime hardware warranty
Cisco Catalyst 9115 Access Point in Chennai, Hyderabad, Kerala, bangalore, andhra, India
Cisco Catalyst 9115 Access Point
  • Three radios: 2.4GHz (4x4), 5GHz (4x4), and BLE, Supports OFDMA and MU-MIMO, Internal and external antenna
  • Software: Cisco Unified Wireless Network Software Release 8.9 or later
  • Cisco IOS XE Software Release 16.11 or later
  • Supported wireless LAN controllers: Cisco Catalyst 9800 Series Wireless Controllers
  • Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller
  • 802.11n version 2.0 (and related) capabilities
  • 4x4 MIMO with four spatial streams
  • Maximal Ratio Combining (MRC)
  • 802.11n and 802.11a/g beamforming
  • 20- and 40-MHz channels
  • PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic Shift Diversity (CSD) support
  • 802.11ac
  • 4x4 downlink MU-MIMO with four spatial streams
  • MRC
  • 802.11ac beamforming
  • 20-, 40-, 80-, and 160-MHz channels
  • PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 DFS
  • CSD support
  • 802.11ax
  • 4x4 downlink MU-MIMO with four spatial streams
  • Uplink/downlink OFDMA
  • TWT
  • BSS coloring
  • MRC
  • 802.11ax beamforming
  • 20-, 40-, 80-, and 160-MHz channels
  • PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 DFS
  • CSD support
  • Integrated antenna: 2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth
  • 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
  • External antenna (sold separately)
  • Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
  • Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios
  • Interfaces: 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz
  • Management console port (RJ-45), USB 2.0 (enabled via future software)
  • Indicators: Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
  • Dimensions (W x L x H)
  • Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm)
  • Weight: Cisco Catalyst 9115AXI, 1.98 lb (0.9 kg)
  • Cisco Catalyst 9115AXE, 2.43 lb (1.1 kg)
  • System memory: 2048 MB DRAM, 1024 MB flash
  • Warranty: Limited lifetime hardware warranty
Cisco Catalyst 9130 Series Access Point in Chennai, Hyderabad, Kerala, bangalore, andhra, India
Cisco Catalyst 9130 Series Access Point
  • Four radios: 2.4 GHz (4x4), 5 GHz (8x8 and 4x4), Cisco RF ASIC, and BLE/IoT
  • Cisco Flexible Radio Assignment and Cisco CleanAir Technology
  • Internal and external antenna
  • WiFi 6 certified
  • Software: Catalyst 9130 AXI: Cisco Unified Wireless Network Software Release 8.10.x or later
  • Cisco IOS XE Software Release 16.12.1 with AP Device Pack, or later
  • Catalyst 9130AXE: Cisco Unified Wireless Network Software Release 8.10MR1 or later
  • Cisco IOS XE Software Release 17.1.1 s or later
  • Supported wireless LAN controllers: Cisco Catalyst 9800 Series Wireless Controllers
  • Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller
  • 802.11n version 2.0 (and related) capabilities
  • 4x4 MIMO with four spatial streams
  • Maximal Ratio Combining (MRC)
  • 802.11n and 802.11a/g
  • 20- and 40 MHz channels
  • PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  • Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic Shift Diversity (CSD) support
  • 802.11ac
  • 8x8 downlink MU-MIMO with eight spatial streams
  • MRC
  • 802.11ac beamforming
  • 20-, 40-, 80-, and 160-MHz channels
  • PHY data rates up to 6.9 Gbps (160 MHz with 5 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 DFS
  • CSD support
  • WPA3 support
  • 802.11ax
  • 8x8 uplink/downlink MU-MIMO with eight spatial streams
  • Uplink/downlink OFDMA
  • TWT
  • BSS coloring
  • MRC
  • 802.11ax beamforming
  • 20-, 40-, 80-, and 160-MHz channels
  • PHY data rates up to 10 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • 802.11 DFS
  • CSD support
  • WPA3 support
  • System memory: 2048 MB DRAM, 1024 MB flash
  • Interfaces
  • 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3az
  • Management console port (RJ-45)
  • USB 2.0 at 4.5W (enabled via future software)
  • Dimensions (W x L x H)
  • Access point (without mounting brackets):
  • C9130AXI: 8.9 x 8.9 x 1.88 in. (22.6 x 22.6 x 4.8 cm)
  • C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm)
  • Weight: Cisco Catalyst 9130AXI, 3.2 lb. (1.45 kg)
  • Cisco Catalyst 9130AXE, 3.78 lb. (1.71 kg)
  • Warranty: Limited lifetime hardware warranty
Cisco Catalyst 9117 Access Point in Chennai, Hyderabad, Kerala, bangalore, andhra, India
Cisco Catalyst 9117 Access Point
  • Three radios: 2.4GHz (4x4), 5GHz (8x8), and BLE, Supports OFDMA and MU-MIMO, Internal antenna
  • Software: Cisco Unified Wireless Network Software Release 8.9 or later
  • Cisco IOS XE Software Release 16.11 or later
  • Supported wireless LAN controllers: Cisco Catalyst 9800 Series Wireless Controllers
  • Cisco 3500, 5520, and 8540 Series Wireless Controllers, and Cisco Virtual Wireless Controller
  • 802.11n version 2.0 (and related) capabilities
  • 8x8 MIMO with four spatial streams for 5 GHz band
  • 4x4 MIMO with four spatial streams for 2.4 GHz band
  • Maximal Ratio Combining (MRC)
  • 20- and 40-MHz channels
  • PHY data rates up to 600 Mbps (40 MHz with 5 GHz)
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • Cyclic Shift Diversity (CSD) support
  • 802.11ac
  • 8x8 downlink MU-MIMO with eight spatial streams
  • MRC
  • 802.11ac beamforming
  • 20-, 40-, 80, and 160 MHz channels
  • PHY data rates up to 3.5 Gbps at 5 GHz
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • CSD support
  • 160 MHz support only on 4 spatial stream
  • 802.11ax
  • 8x8 MIMO with eight spatial streams for 5-GHz band
  • 4x4 MIMO with four spatial streams for 2.4-GHz band
  • Downlink OFDMA
  • TWT
  • MRC
  • 802.11ax beamforming
  • 20-, 40-, 80, and 160 MHz channels
  • PHY data rates up to 5 Gbps at 5 GHz
  • Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  • CSD support
  • Integrated antenna: 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
  • 5 GHz, peak gain 6 dBi, internal antenna, omnidirectional in azimuth
  • Interfaces: 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45)IEEE 802.3bz
  • Management console port (RJ-45)
  • USB 2.0 with up to 4.5W (enabled via future software)
  • Indicators: Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
  • Dimensions (W x L x H)
  • Access point (without mounting bracket and mounting features): 8.70 x 8.70 x 1.94 in. (22 x 22 x 4.93 cm)
  • Access point (without mounting bracket): 8.70 x 8.70 x 2.19 in. (22 x 22 x 5.56 cm)
  • Weight: 3.02 lb (1.4 kg)
  • System memory: 2048 MB DRAM, 1024 MB flash
  • Warranty: Limited lifetime hardware warranty
Cisco Aironet 1540 Series Outdoor Access Point in Chennai, Hyderabad, Kerala, bangalore, andhra, India
Cisco Aironet 1540 Series Outdoor Access Point
  • Aironet 1542I
  • Semi omnidirectional antenna
  • 802.11ac Wave 2 support
  • MU MIMO 2x2, 2 spatial streams
  • Flexible deployment with Mobility Express
  • as traditional APs, and in mesh networks
  • Aironet 1542D
  • Directional antenna
  • 802.11ac Wave 2 support
  • MU-MIMO 2x2, 2 spatial streams
  • Flexible deployment with Mobility Express
  • as traditional APs, and in mesh networks
  • 802.11ac Wave 1 and 2 capabilities
  • 1542I/D: 2 x 2 MIMO with two spatial streams
  • Multiuser and single user MIMO
  • Maximal Ratio Combining (MRC)
  • 802.11ac beamforming (transmit beamforming)
  • 20-, 40-, and 80-MHz channels
  • PHY data rates up to 867 Mbps (80 MHz in 5 GHz)
  • Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)  
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic Shift Diversity (CSD) support
  • 802.11n (and related) capabilities
  • 1542I/D: 2 x 2 MIMO with two spatial streams
  • MRC
  • 20- and 40-MHz channels (40 MHz in 5 GHz)
  • PHY data rates up to 300 Mbps
  • Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
  • 802.11 DFS
  • CSD support
  • Data rates supported: 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
  • 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
  • 802.11n data rates on 2.4 and 5 GHz
  • Maximum conducted transmit power
  • 1542I
  • 2.4 GHz: 27 dBm with 2 antennas
  • 5 GHz: 25 dBm with 2 antennas
  • 1542D
  • 2.4 GHz: 27 dBm with 2 antennas
  • 5 GHz: 25 dBm with 2 antennas
  • Interfaces
  • WAN port 10/100/1000BASE-T Ethernet, autosensing (RJ-45), PoE in
  • Management console port (RJ-45)
  • Multicolor LED/Reset button
  • Wireless Access
  • 802.11i, Wi-Fi Protected Access 2 (WPA2), and WPA
  • 802.1X authentication, including Extensible Authentication Protocol (EAP) and Protected EAP (EAP -PEAP), EAP Transport Layer Security (EAP-TLS), EAP-Tunneled TLS
  • (EAP-TTLS), EAP-Subscriber Identity Module (EAP-SIM), and Cisco LEAP
  • VPN pass-through
  • IP Security (IPsec)
  • Layer 2 Tunneling Protocol (L2TP)
  • MAC address filtering
  • Uplink options: Ethernet and wireless mesh
  • Dimensions(L x W x H):
  • 1542I/D: 7.9 x 5.9 x 2.4 in.(20 x 15 x 6.1 cm)
  • Weight
  • 1542I/D: 2.75 lb (1.25 kg)
  • Warranty: 1 year limited hardware warranty
Cisco Aironet 1560 Series Outdoor Access Point in Chennai, Hyderabad, Kerala, bangalore, andhra, India
Cisco Aironet 1560 Series Outdoor Access Point
  • Aironet 1562I
  • 802.11ac Wave 2 support
  • 3x3 MU-MIMO, 3 spatial streams
  • Internal antenna
  • Aironet 1562E
  • 802.11ac Wave 2 support
  • 2x2 MU-MIMO, 2 spatial streams
  • Flexible antenna ports
  • External antenna
  • Aironet 1562D
  • 802.11ac Wave 2 support
  • 2x2 MU-MIMO, 2 spatial streams
  • Directional antenna
  • 802.11ac Wave 1 and 2 capabilities
  • 1562I: 3 x 3 MIMO with three spatial streams
  • 1562E/D 2 x 2 MIMO with two spatial streams
  • Multi and single user MIMO
  • Maximal Ratio Combining (MRC)
  • 802.11ac beamforming (transmit beamforming)
  • 20-, 40-, and 80 MHz channels
  • PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
  • Packet aggregation: A MPDU (Tx/Rx) and A MSDU (Tx/Rx)
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic Shift Diversity (CSD) support
  • 802.11n (and related) capabilities
  • 1562I: 3 x 3 MIMO with three spatial streams
  • 1562E/D: 2 x 2 MIMO with two spatial streams
  • MRC
  • 20- and 40 MHz channels
  • PHY data rates up to 450 Mbps
  • Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
  • 802.11 DFS
  • CSD support
  • Data rates supported
  • 802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
  • 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
  • Interfaces
  • WAN port 10/100/1000BASE-T Ethernet, autosensing (RJ-45), PoE in
  • SFP port (fiber or electrical)
  • Management console port (RJ-45)
  • Multicolor LED
  • DC power input
  • Reset button
  • Uplink options
  • Ethernet, SFP, and wireless mesh (future availability)
  • Dimensions(L x W x D)
  • 1562I: 9.0 x 6.8 x 3.9 in (22.9 x 17.1 x 9.8 cm)
  • 1562D: 9.0 x 6.8 x 4.3 in (22.9 x 17.1 x 10.9 cm)
  • 1562E:: 9.0 x 6.8 x 3.9 in (22.9 x 17.1 x 9.8 cm)
  • Weight
  • 1562I: 5.6 lb (2.5 kg)
  • 1562D: 5.7 lb (2.6 kg)
  • 1562E: 5.6 lb (2.5 kg)
  • Warranty: 1 year limited hardware warranty
Cisco Aironet 1570 Series Outdoor Access Point in Chennai, Hyderabad, Kerala, bangalore, andhra, India
Cisco Aironet 1570 Series Outdoor Access Point

 

  • 802.11ac support
  • 4x4 MIMO, 3 spatial streams
  • Flexible antenna port
  • 802.11n Version 2.0 capabilities
  • 4x4 MIMO with three spatial streams (3SS)
  • Maximal Ratio Combining (MRC)
  • 802.11n and 802.11a/g Beamforming
  • 20- and 40-MHz channels
  • PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic Shift Diversity (CSD) support
  • 802.11ac Wave 1 capabilities
  • 4x4 MIMO with three spatial streams (3SS)
  • Maximum Ratio Combining (MRC)
  • 802.11ac Beamforming
  • 20-, 40-, and 80-MHz channels
  • PHY data rates up to 1.3 Gbps (80 MHz with 5 GHz)
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic Shift Diversity (CSD) support
  • Data Rates Supported: 2.4 GHz - 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
  • Interface
  • WAN port 10/100/1000BASE T Ethernet, autosensing (RJ-45)
  • LAN port 10/100/1000BASE T Ethernet, autosensing (RJ-45)
  • Fiber SFP
  • Cable modem: NA-DOCSIS3.0/Euro-DOCSIS3.0/Japan-DOCSIS3.0 (8x4, 16x8, or 24x8)
  • Management console port (RJ-45)
  • Four multicolor LEDs
  • Reset button
  • Uplink options
  • 1572EAC Ethernet, Fiber SFP, Wireless Mesh
  • 1572IC Ethernet, Fiber SFP, Wireless Mesh, Cable Modem
  • 1572EC Ethernet, Fiber SFP, Wireless Mesh, Cable Modem
  • Dimensions (L x W x D): 1572EAC / 1572EC 11.8 x 7.9 x 6.3 in. (30.0 x 20.1 x 16.0 cm)
  • 1572IC 11.8 x 7.9 x 7.9 in. (30.0 x 20.1 x 20.1 cm)
  • Weight
  • 1572EAC/1572EC 13.5 lbs (6.1 kg)
  • 1572IC 11.5 lbs (5.2 kg)
  • Pole mounting Kit 1 (PMK1):2.2 lbs (1.0 kg)
  • Pole mounting Kit 2 (PMK2):4.4 lbs (2.0 kg)
  • Pole mounting Kit 3 (PMK3):6.1 lbs (2.8 kg)
  • Cable strand mounting bracket 1 (SMK1): 0.3 lbs (0.2 kg)
  • Cable strand mounting bracket 2 (SMK2): 0.7 lbs (0.3 kg)
  • Cable strand mounting bracket 2 (SMK3): 1.2 lbs (0.5 kg)
  • Warranty: 1 year limited Hardware warranty
Cisco Catalyst IW6300 Heavy Duty Series Access Points in Chennai, Hyderabad, Kerala, bangalore, andhra, India
Cisco Catalyst IW6300 Heavy Duty Series Access Points

Designed for Class I Division 2 hazardous locations
Intelligence with intent-based networking to the IoT Edge and IOx support
Partner IoT modules for WirelessHART ISA100
Cisco DNA Assurance for network management
802.11ac Wave 1 and 2 capabilities

2x2 MIMO with two spatial streams
Multi- and single-user MIMO
Maximal-Ratio Combining (MRC)
802.11ac beamforming (transmit beamforming)
20- 40- and 80-MHz channels
PHY data rates up to 867 Mbps (80-MHz bandwidth in 5 GHz)
Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
802.11 Dynamic Frequency Selection (DFS)
Cyclic Shift Diversity (CSD) support

802.11n Version 2.0 (and related) capabilities
2x2 MIMO with two spatial streams
Maximal-Ratio Combining (MRC)
20- and 40-MHz channels
PHY data rates up to 300 Mbps (40-MHz bandwidth in 5 GHz)
Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
802.11 Dynamic Frequency Selection (DFS)
Cyclic Shift Diversity (CSD) support

Data rates supported
2.4-GHz radio:
802.11b: 1 2 5.5 11 Mbps
802.11g: 6 9 12 18 24 36 48 54 Mbps
802.11n data rates:

Interfaces
x1 10/100/1000BASE-T autosensing PoE+ In (802.3at)UPOE in
x2 10/100/1000BASE-T autosensing PoE Out (802.3af) PoE+ out (802.3at)
x1 fiber SFP (fiber or electrical)
Management console port (RJ-45)
USB3.0 port
Multicolor system LED port LED
DC power input (IW-6300H-DC-X-K9 IW-6300H-DCW-X-K9)
AC power input (IW-6300H-AC-X-K9)
Reset button

Uplink options
Ethernet SFP and wireless mesh

Dimensions (W x L x H)
IW-6300H-DC-X-K9: 9.7" x 11" x 3.8"
IW-6300H-DCW-X-K9: 9.7" x 11" x 5.6"
IW-6300H-AC-X-K9: 9.7" x 11" x 5.6"

Weight
13.3 lbs (IW-6300H-AC-X-K9), 9.8 lbs (IW-6300H-DC-X-K9),
12.7 lbs (IW-6300H-DCW-X-K9)

Warranty
1 year

IW 6300 Series
IW-6300H-DC-X-K9: Dual-band 802.11a/g/n/ac Wave 2 external antennas 44-57VDC/POE+/UPOE power input
IW-6300H-DCW-X-K9: Dual-band 802.11a/g/n/ac Wave 2 external antennas 10.8-36VDC/POE+/UPOE power input
IW-6300H-AC-X-K9: Dual-band 802.11a/g/n/ac Wave 2 external antennas 110-220VAC/POE+/UPOE power input

Cisco 6300 Series Embedded Services Access Points in Chennai, Hyderabad, Kerala, bangalore, andhra, India
Cisco 6300 Series Embedded Services Access Points
Embed resilient Cisco WiFi into your hardware.
Extend intent-based networking to your solutions .
IOx support for intelligence at the edge.
Cisco DNA Assurance for worry-free network management.
 
Radio type
2.4 GHz: 802.11b/g/n  2x2 MIMO  2 spatial streams
5 GHz: 802.11a/n/ac  2x2 MIMO  2 spatial streams
 
802.11ac Wave 2 capabilities
 2x2 MIMO with two spatial streams
  Multi- and single-user MIMO
  Maximal-Ratio Combining (MRC)
  802.11ac beamforming (transmit beamforming)
  20- 40- and 80-MHz channels
  PHY data rates up to 867 Mbps (80-MHz bandwidth in 5 GHz)
  Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
  802.11 Dynamic Frequency Selection (DFS)
  Cyclic Shift Diversity (CSD) support
 
802.11n Version 2.0 (and related) capabilities
  2x2 MIMO with two spatial streams
  Maximal-Ratio Combining (MRC)
  20- and 40-MHz channels
  PHY data rates up to 300 Mbps (40-MHz bandwidth in 5 GHz)
  Packet aggregation: A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx)
  802.11 Dynamic Frequency Selection (DFS)
 Cyclic Shift Diversity (CSD) support
 
Data rates supported
2.4-GHz radio:
802.11b: 1  2  5.5  11 Mbps
802.11g: 6  9  12  18  24  36  48  54 Mbps
802.11n data rates:
 
Interfaces
 x1 10/100/1000BASE-T auto-sensing PoE+ in (802.3at)Cisco Universal Power over Ethernet (UPOE) in
  x2 10/100/1000BASE-T auto-sensing PoE out (802.3af) PoE+ out (802.3at)
  x1 fiber SFP (fiber or electrical)
  Management console port (RJ-45)
  USB 3.0 port
  Multicolor system LED  port LED
  DC power input
  Reset button
 
Uplink options
Ethernet  SFP  and wireless mesh
 
Antennas :Dual band
 
PoE output : 35.3 W total
Maximum 30W per PSE port
 
USB interface 
USB 2.0 / USB 3.0 supported
 
Dimensions (H x W x L)
8.5 in. x 7.55 in. x 1.9 in.
 
Weight
3.1 lbs.
 
Warranty
1 year
Cisco Industrial Wireless 3700 Series in Chennai, Hyderabad, Kerala, bangalore, andhra, India
Cisco Industrial Wireless 3700 Series
Industrial  outdoor 802.11ac wireless.
Designed and certified for extreme environments.
Rail - rolling stock  shock and vibration certified.
Chipset with best-in-class RF architecture.
 
Software
Cisco Unified Wireless Network Software Release with AireOS Wireless Controllers:
8.0.120.0 or later for the Cisco IW3700 Series Access Point
Cisco IOS Software Release
 15.3(3)JA5 or later for the Cisco IW3700 Series Access Point
 
802.11ac Wave 1 capabilities
 
  4 x 4 MIMO with 3 spatial streams
  Maximal-Ratio Combining (MRC)
  802.11ac beamforming
  20- 40- and 80-MHz channels
  PHY data rates up to 1.3 Gbps (80 MHz with 5 GHz)
  Packet aggregation: A-MPDU (Tx/Rx) A-MSDU (Tx/Rx)
  802.11 Dynamic Frequency Selection (DFS)
  Cyclic Shift Diversity (CSD) support
 
802.11n version 2.0 (and related) capabilities
 
4 x 4 MIMO with 3 spatial streams
  Maximal-Ratio Combining (MRC)
 802.11n and 802.11a/g beamforming
  20- and 40-MHz channels
 PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
 Packet aggregation: A-MPDU (Tx/Rx) A-MSDU (Tx/Rx)
 802.11 Dynamic Frequency Selection (DFS)
 Cyclic Shift Diversity (CSD) support
 
Data rates supported
802.11a: 6  9  12  18  24  36  48  and 54 Mbps
802.11g: 1  2  5.5  6  9  11  12  18  24  36  48  and 54 Mbps
 
Interfaces
 
 10/100/1000BASE-T autosensing (M12 8P female connector with X-coding per IEC 61076-2) PoE In (802.3af) PoE+ In (802.3at)
 10/100/1000BASE-T autosensing (M12 8P female connector with X-coding per IEC 61076-2) PoE Out (802.3af)
 Management console port (serial with RJ-45 connector)
 
Indicators
 Status LED indicates boot loader status  association status  operating status  boot loader warnings  boot loader errors
 
System memory
 512 MB DRAM
 64 MB flash
 
Dimensions (W x L x H)
 Access point (not including connectors): 11.3 x 8.0 x 2.3 in (28.7 x 20.3 x 5.9 cm)
 Volume: 148 cubic inches (2.4 liters)
 
Weight
  6.7 lb (3.0 kg)
 
Warranty
5-year limited hardware warranty
Cisco Catalyst 9800 L Wireless Controller in Chennai, Hyderabad, Kerala, bangalore, andhra, India
Cisco Catalyst 9800 L Wireless Controller

For small campus deployments with the flexibility of copper or fiber uplinks
Up to 250 APs 5000 clients and 5-Gbps throughput
Hot patching time saving and hitless upgrades
Advanced on demand telemetry

The Cisco Catalyst 9800-L is a fixed wireless controller with seamless software updates for small and midsize enterprises.

Built from the ground up for intent-based networking the Cisco Catalyst 9800 L brings together
Cisco IOS XE Software and Cisco RF excellence to create a best in-class wireless experience for your evolving and growing organization

The Cisco Catalyst 9800-L is feature rich and enterprise ready to power your business-critical operations and transform end-user experiences:
Choose between copper and fiber uplinks. This choice gives you flexibility in your network.

High availability and seamless software updates enabled by hot and cold patching
keep your clients and services always on in planned and unplanned events.

Secure the air devices and users with the Cisco Catalyst 9800-L.
The wireless infrastructure becomes the strongest first line of defense
with Encrypted Traffic Analytics and Software-Defined Access (SD-Access). The controller comes with built-in security: Secure Boot
runtime defenses image signing integrity verification and hardware authenticity.

Built on a modular operating system the controller features open and programmable APIs that enable automation of day-0 to day-N network operations.
Model-driven streaming telemetry provides deep insights into your network and client health.

Maximum number of access points:250 500 (with performance license)
Maximum number of clients : 5000 10000 (with performance license)
Maximum throughput : 5 Gbps 10 Gbps(with performance license)
Maximum WLANs : 4096
Maximum VLANs : 4096
Fixed uplinks : 2x 10G/Multigigabit copper or 2x 10G/Multigigabit fiber
Power supply : 110W 12VDC AC/DC adapter
Maximum power consumption : 9800-L-C: 86.9W (with 4.5W USB load) / 9800-L-F: 84.5W (assumes 2pc 2.5W SFP and with 4.5W USB load)
Deployment modes : Centralized Cisco FlexConnect and fabric
Form factor : 1RU; half-width chassis allows side-by-side installation in standard 19-in. rack
License : Smart License enabled
Software : Cisco IOS XE
Management : Cisco DNA Center Cisco Prime Infrastructure and third party (open standards APIs)
Interoperability : AireOS-based controllers
Access points : Cisco Aironet 802.11ac Wave 1 and Wave 2 access points Cisco Catalyst 9100 802.11ax access points
Dimesnsion :
Width : 8.5 in. (21.59 cm)
Depth : 9.06 in. (23.01 cm)
Height : 1.58 in. (4.02 cm)
Weight : C9800-L-C: 3.95 lb. (1.79 kg)
C9800-L-F: 4.01 lb. (1.82 kg)

Cisco Catalyst 9800 80 Wireless Controller in Chennai, Hyderabad, Kerala, bangalore, andhra, India
Cisco Catalyst 9800 80 Wireless Controller

High availability and seamless software updates enabled by hot patching keep your clients and services always on in planned and unplanned events.

Secure air devices and users with the Cisco Catalyst 9800-80. Wireless infrastructure becomes the strongest first line of defense with Cisco Encrypted Traffic Analytics (ETA) and Software-Defined Access (SD-Access).
The controller comes with built-in security: secure boot runtime defenses image signing integrity verification and hardware authenticity.

Built on a modular operating system the 9800-80 features open and programmable APIs that enable automation of day-0 to day-N network operations.
Model-driven streaming telemetry provides deep insights into the health of your network and clients.

Maximum number of access points : Up to 6000
Maximum number of clients : 64 000
Maximum throughput : Up to 80 Gbps
Maximum WLANs : 4096
Maximum VLANs : 4096
Max site tags : 6000
Max Flex APs per site : 100
Max policy tags : 6000
Max RF tags : 6000
Max RF profiles : 12000
Max policy profiles : 1000
Max flex profiles : 6000
Fixed uplinks : 8x 10 GE or 6x 10 GE + 2x 1 GE SFP+/SFP
Modular uplinks (optional)

The supported uplink modules are
C9800-18X1GE(=)
C9800-10X10GE(=)
C9800-1X40GE(=)
C9800-2X40GE(=)
C9800-1X100GE(=)
The uplink modules are hot-swappable.
Supports 10 GE 40 GE and 100 GE QSFP transceivers
Redundant power supply : AC or DC power supply
Maximum power consumption with modules 600W
Deployment modes : Centralized Cisco FlexConnect® and Fabric Wireless (SD-Access)
Form factor : 2RU
License : Smart License enabled
Operating system : Cisco IOS XE
Management : Cisco DNA Center Cisco Prime Infrastructure integrated WebUI and third party (open standards APIs)
Interoperability : AireOS-based controllers
Policy engine : Cisco Identity Services Engine (ISE)
Location platform : Cisco Connected Mobile Experiences (CMX)/Cisco DNA Spaces*
Access points : Aironet 802.11ac Wave 1 and Wave 2 access points Catalyst 9100 802.11ax access points
Width : 17.3 inches (43.94 cm)
Depth : 20.5 inches (52.07 cm)
Height : 3.47 inches (8.81 cm)
Weight : 31.5 lb (14.29 kg)
Hard Disk Drives (HDD) : SATA solid-state drive (SSD)
240 GB of memory