Lenovo switches Details

• Performance: Line rate performance, 1.08Tbps switching throughput, up to 714 Million packets per second (Mpps), up to 9,416 byte jumbo frames, 32MB buffer size
• Interface configurations: 48x 10GBase T (RJ45)
• 6x 100GbE ports supporting various combinations of: Up to 6x 100GbE QSFP28 transceivers
• Up to 16x 25GbE SFP28 ports using special (QSFP28 to 4x SFP28) break out DAC or optics cable
• Up to 16x 10GbE SFP+ ports using special (QSFP28 to 4x SFP+) break out DAC or optics cable
• Management interfaces: 1x RJ45 Ethernet Management port
• 1x Mini USB (Type AB) serial console port
• 1x USB2.0 for mass storage access
• Cooling: Rear to front model, with five variable-speed hot swap fan modules that provide 4+1 redundancy
• Power: Dual hot swap internal power modules that provide 1+1 redundancy with 407W maximum consumption
• Network OS: ONIE (Open Network Install Environment)
• Limited Warranty: 3 year customer replaceable unit next business day with service and extensions available

• Part Number: NE0152T
• Ports: 48x 1GBASE T RJ45 ports, 4x 10GbE SFP+ ports
• Connectitivty: Lenovo CNOS included
• Redundant, hot swap power & fansGet Lenovo CNOS on a full featured high performance 1GBASE T switch
• optimized for data center management or SMB data network

• Performance: Line rate performance up to 640Gbps switching throughput; as low as 760 ns port to port switching latency, up to 476 Million packets per second (64-byte packets); up to 9,216 byte jumbo frames; 12MB buffer size
• Interface Configurations: 32x 10Gb Ethernet SFP+ ports
• Virtualization: VLAG, SDN Ready
• Cooling: Front to rear or rear to front cooling, three variable speed hot swap fan assemblies that provide N+1 cooling redundancy
• Power: Dual load sharing hot swap internal power modules, 96W typical / 99W maximum consumption
• Management Software Supported: Lenovo XClarity, VMware, OpenStack, Ganglia, Nutanix
• Automation: Ansible, Chef, Puppet
• API: Python, REST, Telemetry
• Limited Warranty: 3 year customer replaceable unit and software warranty

• Performance:Line rate performance up to 640Gbps switching throughput; as low as 760 ns (SFP+) or 2.3 us (10GBASE-T) port to port switching latency; up to 476 million packets per second (Mpps) (64 byte packets); up to 9,216 byte jumbo frames; 12MB buffer size
• Interface Configurations: 24x 10GBase T + 8x 10Gb SFP+ Ethernet ports
• Virtualization: VLAG, SDN ready
• Cooling: Front to rear or rear to front cooling, three variable speed hot swap fan assemblies that provide N+1 cooling redundancy
• Power: Dual load sharing hot swap internal power modules, 96W typical / 99W maximum consumption
• Management Software Supported: Lenovo XClarity, VMware, OpenStack, Ganglia, Nutanix
• Automation: Ansible, Chef, Puppet
• API: Python, REST, Telemetry
• Limited Warranty: 3years customer replaceable unit and software warranty

• Performance: Line rate performance, 1.44Tbps switching throughput, as low as 700 ns (QSFP+) or 2.4 us (10GBASET) port-to-port switching latency,up to 714 Million packets per second (Mpps), up to 9,216 byte jumbo frames, 12MB buffer size
• Interface Configurations: 48x 10GBase T + 6x 40Gb QSFP+ Ethernet ports or 6x (4x 10GbE) with breakout cables
• Virtualization: VLAG, SDN ready
• Cooling: Front to rear or rear to front cooling, five variable speed hot swap fan assemblies that provide N+1 cooling redundancy
• Power: Dual load sharing hot swap internal power modules, 202W typical / 291W maximum consumption
• Management Software Supported: Lenovo XClarity, VMware, OpenStack, Ganglia, Nutanix
• Automation: Ansible, Chef, Puppet
• API: Python, REST, Telemetry
• Limited Warranty: 3 year customer replaceable unit and software warranty

• Performance: Line rate performance, up to 6.4Tbps switching throughput, as low as 490 ns port to port switching latency, up to 2,702 Million packets per second (Mpps), up to 9,216 byte jumbo frames, 16MB buffer size
• Interface Configurations: 32x 100Gb Ethernet ports supporting various combinations:
• Up to 32x QSFP28 100GbE QSFP28 transceivers
• Up to 32x QSFP 40GbE QSFP transceivers
• Up to 32x QSFP28 100Gb DAC cable or AOC cable. (Various lengths: 1m, 3m, 5m, etc.)
• Up to 128x SFP28 25GbE ports using special (QSFP28 to 4xQSFP28) break-out DAC cable or optics with break out fibers. (Various lengths: 1m, 3m, 5m, etc.)
• Up to 64x QSFP28 50GbE ports using special (QSFP28 to 2xQSFP28) break-out DAC cable or optics with break out fibers. (Various lengths: 1m, 3m, 5m, etc.)
• Up to 128x SFP+ 10GbE ports using special (QSFP to 4xSFP+) break-out DAC cable or optics with break out fibers. (Various lengths: 1m, 3m, 5m, etc.)
• Virtualization: VLAG, SDN ready
• Cooling: Front to rear or rear to front cooling, six variable speed hot swap fan assemblies that provide N+1 cooling redundancy
• Power: Dual load sharing hot swap internal power modules, 212W typical / 436W maximum consumption
• Management Software Supported: Lenovo XClarity, VMware, OpenStack, Ganglia, Nutanix
• Automation: Ansible, Chef, Puppet
• API: Python, REST, Telemetry
• Limited Warranty: 3 year customer replaceable unit and software warranty

• Performance: Line rate performance, up to 3.6Tbps aggregated throughput, as low as 480 ns (QSFP28) or 535 ns (SPP28) port to port switching latency, up to 2,678 Million packets per second (Mpps) (64 byte packets), up to 9,216 byte jumbo frames, buffer size 22MB
• Interface Configurations: 48x 25Gb Ethernet ports supporting various combinations of:
• Up to 48x SFP28 25GbE SFP28 transceivers
• Up to 48x SFP+ 10GbE SFP+ transceivers
• Up to 48x SFP28 25GbE SFP28 DAC and AOC (Various lengths: 1m, 3m, 5m, etc.)
• Up to 48x SFP+ 10GbE SFP+ DAC and AOC (Various lengths: 1m, 3m, 5m, etc.)
• 6x 100Gb Ethernet ports supporting various combination of:
• Up to 6x QSFP28 100GbE QSFP28 transceivers
• Up to 6x QSFP 40GbE QSFP transceivers
• Up to 6x QSFP28 100Gb DAC cable or AOC cable (Various lengths: 1m, 3m, 5m, etc.)
• Up to 24x SFP28 25GbE ports using special (QSFP28 to 4xSFP28) break out DAC cable or optics with break-out fibers (Various lengths: 1m, 3m, 5m, etc.)
• Up to 12x QSFP28 50GbE ports using special (QSFP28 to 2xQSFP28) break out DAC cable or optics with break-out fibers (Various Lengths 1m, 3m, 5m, etc.)
• Up to 24x SFP+ 10GbE ports using special (QSFP to 4xSFP+) break out DAC cable or optics with break-out fibers. (Various lengths: 1m, 3m, 5m, etc.)
• Virtualization: VLAG, SDN ready
• Cooling: Front to rear or rear to front cooling, six variable speed hot swap fan assemblies that provide N+1 cooling redundancy
• Power: Dual load sharing hot swap internal power modules, 213W typical / 289W maximum consumption
• Management Software Supported: Lenovo XClarity, VMware, OpenStack, Nutanix, Ganglia
• Automation: Ansible, Chef, Puppet
• API: Python, REST, Telemetry
• Limited Warranty: 3 year customer replaceable unit and software warranty

• Performance: 100% line rate performance Sub 600 nanoseconds latency 1.44 Tbps non-blocking switching throughput (full duplex) 1 Bpps
• Interface options: 48 × 1/10GbE SFP/SFP+ ports, 6 × 40GbE QSFP+ ports Up to 72 × 10GbE SFP+ connections with optional breakout cables
• Virtualization: VMready, Virtual Fabric (UFP) support
• OpenFlow: Yes
• Dimensions: 17.3 inches wide, 19.19 inches deep, 1U high
• Weight: 9.1 kg (20 lb)
• Power: Dual load sharing hot swap internal power modules, 50 - 60 Hz, 100 - 240 V ac auto switching per module typical power consumption of 123W
• Warranty: 3 year customer replaceable unit and onsite limited warranty, next business day 9x5, service upgrades available

• Performance: 176 Gbps switching throughput (full duplex) 131 Mpps
• SFP/SFP+ Media Types 10 Gb Ethernet SFP+:
• 10 GbE short range (SR) SFP+ transceivers
• 10 GbE long range (LR) SFP+ transceivers
• 10 GbE RJ-45 SFP+ transceivers
• 10 GbE SFP+ active optical cables (AOCs)
• 10 GbE SFP+ direct attach copper (DAC) cables<
• 1/10 Gb Ethernet SFP+:
• 1/10 GbE SX/SR SFP+ transceivers
• Gb Ethernet SFP: 1 GbE short wavelength (SX) SFP transceivers
• 1 GbE long wavelength (LX) SFP transceivers
• 1 GbE RJ-45 SFP transceivers
• Interface options: 48 × 1 GbE (48 RJ-45), 4 × 10 GbE SFP+
• Dimensions: 17.3 inches wide, 15 inches deep, 1 RU high
• Weight: 6.1 kg (13.45 lb)
• Port Speeds: 1 GbE RJ-45 fixed ports:
• 10/100/1000 Mbps autosensing
• 10 GbE SFP+ transceivers, DAC cables and AOCs: 10 Gbps
• 1/10 GbE SFP+ transceivers: 1 Gbps or 10 Gbps
• 1 GbE SFP transceivers: 1 Gbps
• Temperature:    
• Ambient operating: 0º C to 40º C
• Altitude: Operating 1,800 m (6,000 ft)
• Acoustic Noise    
• Less than 65 dB
• Heat Dissipation    
• 259 BTU/hour
• Mean time between failures (MTBF)    
• 204,577 hours with ambient operating temperature of 40º C
• Airflow    
• Rear to front cooling
• Power: Single power, 50 - 60 Hz, 100 - 240 V ac with typical power consumption of 76 W, optional external Lenovo RackSwitch G7000 Redundant Power Supply with support
• for up to four RackSwitch G7052 switches
• Warranty: 3 year, next business day replacement, phone support and software upgrades, service upgrades and extensions available

• Ports :  16 x 400/100/40-Gbps QSFP-DD ports
• System memory :  16 GB NX-OS, 24 GB ACI
• Solid-State Disk (SSD) :  128 GB
• USB  1 port
• RS-232 serial console ports 1
• Management ports 2 (1 x 10/100/1000BASE-T and 1 x 1-Gbps SFP+)
• Broadwell-DE CPU 4 cores
• Dimensions (H x W x D) 3.38 x 17.37 x 22.27 in. (8.59 x 44.13 x 56.58 cm)
• N9K-C9316D-GX is the Cisco Nexus 9316D Spine switch with 16p 400/100G QSFP-DD. Based on Cisco® Cloud Scale technology, the Cisco
• Nexus® 9300-GX switches are the next generation of fixed Cisco Nexus 9000 Series Switches. The platform introduces a fully backwardcompatible 400G optical interface Quad Small Form-Factor Pluggable – Double Density (QSFP-DD) to transparently migrate existing data center
• fabrics from 40-Gbps and 100-Gbps speeds to 400 Gbps. The platform provides investment protection for customers, delivering highly flexible
• layer 2 and layer 3 scalability, and performance to meet the changing needs of virtualized data centers and automated cloud environments.

• Ports  : 28 x 100/40-Gbps QSFP28 ports and 8 x 400/100-Gbps QSFP-DD ports
• System memory :  16 GB NX-OS, 24 GB ACI
• Solid-State Disk : (SSD) 128 GB
• USB : 1 port
• RS-232 serial console ports  : 1
• Management ports : 2 (1 x 10/100/1000BASE-T and 1 x 1-Gbps SFP+)
• Broadwell-DE CPU  : 4 cores
• Dimensions (H x W x D) 1.72 x 17.37 x 25.5 in. (4.37 x 44.13 x 64.8 cm)
• N9K-C93600CD-GX is the Cisco Nexus 9316D Spine and Leaf switch with 28p 100/40G QSFP28 and 8p 400/100G QSFP-DD. Based on Cisco
• Cloud Scale technology, the Cisco Nexus 9300-GX switches are the next generation of fixed Cisco Nexus 9000 Series Switches. The platform
• introduces a fully backward-compatible 400G optical interface Quad Small Form-Factor Pluggable – Double Density (QSFP-DD) to transparently
• migrate existing data center fabrics from 40-Gbps and 100-Gbps speeds to 400 Gbps. The platform provides investment protection for
• customers, delivering highly flexible layer 2 and layer 3 scalability, and performance to meet the changing needs of virtualized data centers and
• automated cloud environments.

• Ports : 48 x 10/25-Gbps and 6 x 40/100-Gbps QSFP28 ports
• Downlink supported speeds : 1/10/25-Gbps speeds
• CPU: 4 cores
• System memory: 24 GB
• SSD drive : 64 GB
• System buffer: 40 MB
• Management ports 2 ports: 1 RJ-45 and 1 SFP
• USB ports : 1
• RS-232 serial ports :  1
• Power supplies (up to 2) : 650W AC, 930W DC, or 1200W HVAC/HVDC
• Typical power (AC/DC) :  210W
• Maximum power (AC/DC) :  470W
• Physical dimensions c
• (H x W x D)
• 1.72 x 17.3 x 22.5 in.
• (4.4 x 43.9 x 57.1 cm)
• Weight (without power supplies or fans) 17.2 lb (7.8 kg)
• N9K-C93180YC-EX is one of the Cisco Nexus 9300-EX switches. Cisco Nexus 9300-EX platforms are the next generation of fixed Cisco Nexus
• 9000 Series Switches. The new platforms support cost-effective cloud-scale deployments, an increased number of endpoints, and cloud services
• with wire-rate security and telemetry. The platforms are built on modern system architecture designed to provide high performance and meet
• the evolving needs of highly scalable data centers and growing enterprises.

• Device Type : Switch - 24 ports - L3
• Enclosure Type : Rack-mountable 1U
• Subtype : 50 Gigabit Ethernet
• Ports : 24 x 40/50 Gigabit QSFP+ + 6 x 40/100 Gigabit QSFP+
• Performance : Bandwidth: 3.6 Tbps ¦ Active SPAN sessions: 4
• Capacity : Multiple Spanning Tree Protocol instances: 64 ¦ HSRP groups: 490 ¦ 
• Per VLAN Rapid Spanning Tree instances: 4000 ¦ Maximum number of links in a port channel: 32 ¦ Maximum number of port channels: 512 ¦ ECMP paths: 64 ¦ Virtual Routing and Forwarding (VRF) instances: 1000 ¦ VLANs supported: 4096 ¦ ACL entries (egress): 2000 ¦ ACL entries (ingress): 4000 ¦ IGMP snooping groups: 8000 ¦ Multicast routes: 8000
• MAC Address Table Size : 512K entries
• Routing Protocol :OSPF, RIP, RIP-2, BGP, EIGRP, HSRP, PIM-SM, MSDP, ECMP, MPLS
• Features : Layer 3 switching, High Availability, hot swappable 4 fans, Virtual PortChannel (vPC) technology, In-Service Software Upgrade (ISSU), NPV Gateway mode, Virtual Extensible LAN (VXLAN), Source-Specific Multicast (SSM), Ethernet Virtual Private Network (EVPN), 40MB system buffer
• RAM : 24 GB
• Built-in Devices : 64 GB SSD
• The Cisco Nexus 93180LC-EX Switch is the industry's first 50-Gbps capable 1RU switch that supports 3.6 Tbps of bandwidth and over 2.6 
• bpps across 24 fixed 40/50-Gbps QSFP+ ports. Ports numbered 25, 27, 29, 30, 31, and 32 are the 6 uplinks ports, which can be configured 
• as 40- and 100-Gbps ports, offering flexible migration options. This switch is capable of supporting flexible port configurations.

• Device Type    : Switch - 48 ports - L3 - Managed
• Enclosure Type     :Rack-mountable 1U
• Subtype    :25 Gigabit Ethernet / 32Gb Fibre Channel
• Ports    :48 x 1/10/25 Gigabit Ethernet / 8/16/32Gb Fiber Channel / FCoE SFP+ + 6 x 40/100 Gigabit QSFP28 / FCoE
• Performance    :Bandwidth: 3.6 Tbps
• Active SPAN sessions: 4
• Capacity:     Multiple Spanning Tree Protocol instances: 64
• HSRP groups: 490
• Per VLAN Rapid Spanning Tree instances: 4000
• Maximum number of links in a port channel: 32
• Maximum number of port channels: 512
• ECMP paths: 64
• Virtual Routing and Forwarding (VRF) instances: 16000
• VLANs supported: 4096
• ACL entries (egress): 2000
• IGMP snooping groups: 32000
• Multicast routes: 32000
• Latency: < 1 µs
• MAC Address Table Size : 512K entries
• Routing Protocol    : OSPF, RIP, RIP-2, BGP, EIGRP, HSRP, PIM-SM, MSDP, ECMP, MPLS
• Features:    Spanning Tree Protocol (STP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Virtual PortChannel (vPC) technology, MACsec support, 4 fans, Virtual Extensible LAN (VXLAN), Source-Specific Multicast (SSM), Ethernet Virtual Private Network (EVPN), 40MB system buffer, Power On Auto Provisioning (POAP)
• Compliant Standards :     IEEE 802.1ae
• RAM :    64 GB
• Built-in Devices : 128 GB SSD
• Interfaces    48 x 1/10/25Gbit LAN / 8/16/32Gb Fibre Channel SFP+ downlink
• 6 x 100Gbit/40Gbit LAN QSFP28 uplink
• 1 x management RJ-45
• 1 x USB
• 1 x serial (RS-232)

• Ports : 96 fixed 1/10GBASE-T and 6 QSFP+ ports
• Supported speeds :100 Megabit Ethernet and 1/10 Gigabit Ethernet speeds
• 40 Gigabit Ethernet uplink
• ports : 6 fixed QSFP+ ports
• Physical (H x W x D) 3.5 x 17.5 x 22.5 in. (8.9 x 44.5 x 57.1 cm)
• Weight 26 lb (11.8 kg) (without power supplies, fans, or uplink module)
• Predictable high performance : 
• Latency of 1 to 2 microseconds with up to 1.28 Tbps of bandwidth enables customers to build a robust switch fabric scaling
• from as few as 200 10-Gbps server ports to more than 200,000 10-Gbps server ports.
• Increased integrated buffer space : 
• Up to a total of 50 MB of integrated shared buffer space allows better management of speed mismatch between access and
• uplink ports.
• Designed for availability : 
• Hot-swappable, redundant power supplies and fan trays increase availability.
• Flexible airflow configuration :
• Port-side intake and port-side exhaust airflow configurations are both supported.
• CPU, SSD, and memory : 
• Dual-core 2.5-GHz x86 CPUs with 64-GB SSD drive and 16 GB of memory provide enhanced network performance.
• Power efficiency : 
• All Cisco Nexus 9000 Series power supplies are 80 Plus Platinum rated.
• Advanced optics : 
• Cisco offers a pluggable 40 Gigabit Ethernet QSFP+ transceiver that enables customers to use existing 10 Gigabit Ethernet
• data center cabling to support 40 Gigabit Ethernet connectivity. This technology facilitates adoption of 40 Gigabit Ethernet
• with no cable infrastructure upgrade cost.

• N9K-C93108TC-EX is one of the Cisco Nexus 9300-EX switches. Cisco Nexus 9300-EX platforms are the next generation of fixed Cisco Nexus
• 9000 Series Switches. The new platforms support cost-effective cloud-scale deployments, an increased number of endpoints, and cloud services
• with wire-rate security and telemetry. The platforms are built on modern system architecture designed to provide high performance and meet
• the evolving needs of highly scalable data centers and growing enterprises.
• Ports :  48 x 10GBASE-T and 6 x 40/100-Gbps QSFP28 ports
• Downlink supported speeds :  100-Mbps and 1/10-Gbps speeds
• CPU : 4 cores
• System memory : 24 GB
• SSD drive : 64 GB
• System buffer  : 40 MB
• Management ports 2 ports: 1 RJ-45 and 1 SFP
• USB ports  : 1
• RS-232 serial ports : 1
• Power supplies (up to 2) :  650W AC, 930W DC, or 1200W HVAC/HVDC
• Typical power (AC/DC) :  290W
• Maximum power (AC/DC) : 499W
• Physical dimensions
• (H x W x D)
• 1.72 x 17.3 x 22.5 in.
• (4.4 x 43.9 x 57.1 cm)
• Weight (without power supplies or fans) 17.7 lb (8.0 kg)

• Device Type : Switch - 36 ports - L3 - managed
• Enclosure Type : Desktop, rack-mountable 2U
• Subtype : 40 Gigabit Ethernet
• Ports : 36 x 40 Gigabit QSFP+
• Performance : Bandwidth: 1.44 Tbps
• Capacity : Longest prefix match (LPM) entries (IPv4): 16000 ¦ Host table entries (IPv4): 88000 ¦ MAC addresses: 160000 ¦ IPv4 routes (Multicast): 32000 ¦ Virtual interfaces (VLANs): 4096 ¦ Equal-Cost Multipathing (ECMP) ways: 64 ¦ Multiple Spanning Tree Protocol instances: 64 ¦ Rapid Per-VLAN Spanning Tree Plus instances: 507 ¦ Virtual Routing and Forwarding (VRF) entries: 1000 ¦ IGMP snooping entries: 32000
• Jumbo Frame Support : Yes
• Routing Protocol : IS-IS, BGP, EIGRP, HSRP, VRRP, OSPFv2, PIM-SM, OSPFv3, MSDP, static IPv4 routing, ECMP, Bidirectional Forwarding Detection (BFD), VRRPv3
• Remote Management Protocol :SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2
• Authentication Method : 
• RADIUS, PAP, CHAP, TACACS+, MS-CHAP, MS-CHAP v.2
• Features : 
• Flow control, modular design, load balancing, VLAN support, IGMP snooping, Syslog support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, RDMA support, Virtual Route Forwarding-Lite (VRF-Lite), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), Virtual Routing and Forwarding (VRF), Class of Service (CoS), DiffServ Code Point (DSCP) support
• Compliant Standards : 
• IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 801.1p, IEEE 802.1ab (LLDP), IEEE 802.3ba

• Ports :32 QSFP+ ports
• Supported speeds :40 Gigabit Ethernet speeds
• Physical: (H x W x D) 1.72 x 17.3 x 22.5 in. (4.4 x 43.9 x 57.1 cm)
• Weight 22 lb (10.0 kg) (without power supplies or fans)
• Predictable highperformance : 
• Latency of 1 to 2 microseconds with up to 1.28 Tbps of bandwidth enables customers to build a robust switch fabric scaling
• from as few as 200 10-Gbps server ports to more than 200,000 10-Gbps server ports.
• Increased integrated buffer space : 
• Up to a total of 50 MB of integrated shared buffer space allows better management of speed mismatch between access and
• uplink ports.
• Designed for availability : 
• Hot-swappable, redundant power supplies and fan trays increase availability.
• Flexible airflow configuration: 
• Port-side intake and port-side exhaust airflow configurations are both supported.
• CPU, SSD,and memory : 
• Dual-core 2.5-GHz x86 CPUs with 64-GB SSD drive and 16 GB of memory provide enhanced network performance.
• Power efficiency : 
• All Cisco Nexus 9000 Series power supplies are 80 Plus Platinum rated.
• Advanced optics : 
• Cisco offers a pluggable 40 Gigabit Ethernet QSFP+ transceiver that enables customers to use existing 10 Gigabit Ethernet
• data center cabling to support 40 Gigabit Ethernet connectivity. This technology facilitates adoption of 40 Gigabit Ethernet
• with no cable infrastructure upgrade cost

• Ports :32 QSFP+ ports
• Supported speeds :40 Gigabit Ethernet speeds
• Physical: (H x W x D) 1.72 x 17.3 x 22.5 in. (4.4 x 43.9 x 57.1 cm)
• Weight 22 lb (10.0 kg) (without power supplies or fans)
• Predictable highperformance : 
• Latency of 1 to 2 microseconds with up to 1.28 Tbps of bandwidth enables customers to build a robust switch fabric scaling
• from as few as 200 10-Gbps server ports to more than 200,000 10-Gbps server ports.
• Increased integrated buffer space : 
• Up to a total of 50 MB of integrated shared buffer space allows better management of speed mismatch between access and
• uplink ports.
• Designed for availability : 
• Hot-swappable, redundant power supplies and fan trays increase availability.
• Flexible airflow configuration: 
• Port-side intake and port-side exhaust airflow configurations are both supported.
• CPU, SSD,and memory : 
• Dual-core 2.5-GHz x86 CPUs with 64-GB SSD drive and 16 GB of memory provide enhanced network performance.
• Power efficiency : 
• All Cisco Nexus 9000 Series power supplies are 80 Plus Platinum rated.
• Advanced optics : 
• Cisco offers a pluggable 40 Gigabit Ethernet QSFP+ transceiver that enables customers to use existing 10 Gigabit Ethernet
• data center cabling to support 40 Gigabit Ethernet connectivity. This technology facilitates adoption of 40 Gigabit Ethernet
• with no cable infrastructure upgrade cost.

Physical : 64-port 40/100G QSFP28 ports & 2-port 1/10G SFP+ ports
1200 watt (W) AC power supplies or 930W DC power supplies (up to 2)
Hot-swappable, dual fan trays with redundant fans
System memory: 32GB
SSD: 256GB
USB: 1 port
RS-232 serial console ports: 1
(1) 1-/10-Gigabit SFP+ ports (2)
(2) 40-/100-Gigabit QSFP28 ports (ports 1 to 48 in 4 rows of 12 ports)
(3) Green colored 40-/100-Gigabit QSFP28 ports supporting MACsec (when software support is available) (ports 49 to 64 in 4 rows of 4 ports)
(4) Fan modules (3) with slots numbered from 1 (left) to 3 (right)
(5) USB port (1)
(6) Management port (1—SFP optical port)
(7) Management port (1—RJ-45 copper port)
(8) Power supply modules (1 or 2) (AC power supplies shown) with slots numbered 1 (top) and 2 (bottom)
(9) Console port (1)

Management ports:
2 (1 x 10/100/1000BASE-T and 1 x 1-Gbps SFP+)
Broadwell-DE CPU: 4 cores
Physical (H x W x D) 3.38 x 17.37 x 22.27 in. (8.59 x 44.13 x 56.58 cm)
Weight (chassis) 36.9lb (16.74kg) with power supplies and fans, 27.4 lb (12.43kg) without power supplies and fans

• The Cisco Nexus 9348GC-FXP Switch is a 1RU switch that supports 696 Gbps of bandwidth and over 250 mpps. The 48 1GBASE-T downlink ports on the switch can be configured to work as 100-Mbps, 1-Gbps ports. The 4 ports of SFP28 can be configured as 1/10/25-Gbps and the 2 ports of QSFP28 can be configured as 40- and 100-Gbps ports.
• Cisco Nexus 9348GC-FXP Switch is designed to meet the changing needs of data centers, big data applications, and automated cloud environments.
• Highlights points: 
• Powered by Cisco Cloud Scale ASIC technology
• Support for Cisco NX OS Software and Cisco ACI (Application Centric Infrastructure) architecture
• High-performance, Layer 2 and 3 non-blocking architecture
• Easily deployed into either a hot-aisle or cold-aisle configuration
• Cisco Tetration Analytics Platform support with built-in hardware sensors for rich traffic flow telemetry and line-rate data collection
• Cisco Nexus Data Broker support for network traffic monitoring and analysis
• Robust hardware system specifications feature 4-core CPU, 24 GB of system memory, and respectively 128-GB SSD drive
• The 40-MB buffer supporting highly scalable data centers and big data applications 696 Gbps of bandwidth and over 250 mpps
• Fixed downlinks with 48 x FE/GE
• Fixed uplinks with 4 x 25GE SFP28, 2 x 100GE QSFP28

• Architectural flexibility : 
• Support for Cisco ACI architecture and NX-OS
• 48 x 1/10/25 Gbps fiber ports
• 12 x 40/100 Gbps QSFP28 ports
• Supports 4.8 Tbps of bandwidth and over 1.8 bpps
• Rich features : 
• Automated, policy-based systems management with Cisco ACI
• Build programmable SDN fabrics leveraging open APIs and over 65 Cisco ACI global technology partners
• Enhanced Cisco NX-OS Software designed for performance, resiliency, scalability, manageability, and programmability
• Real-time buffer utilization per port and per queue, for monitoring traffic micro-bursts and application traffic patterns
• Highly available and efficient design : 
• High-performance, Layer 2 and 3 non-blocking architecture
• Easily deployed into either a hot-aisle or cold-aisle configuration
• Redundant, hot-swappable power supplies and fan trays
• Specifications at a Glance : 
• Powered by cloud-scale technology
• 48 x 1/10/25 Gbps fiber ports
• 12 x 40/100 Gbps QSFP28 ports
• 40 MB buffer
• Up to 4.8 Tbps of bandwidth

• The Cisco Nexus 9336C-FX2 offers flexible port speeds in a compact form factor. Designed to meet the changing needs of data centers, big data applications, and automated cloud environments, this powerful switch delivers superior programmability.
• Main Features : 
• FX2
• Switch
• L3
• managed
• 36 x 100 Gigabit QSFP28 / 40 Gigabit QSFP28
• rack-mountable
• Built-in Devices :128 GB SSD
• Installed Size :24 GB
• Performance :Bandwidth: 2.8 bpps, Bandwidth: 7.2 Tbps
• Features :Ethernet Virtual Private Network (EVPN), Port exhaust, 40MB system buffer, Spanning Tree Protocol (STP) support, Virtual PortChannel (vPC) technology, Multiple Spanning Tree Protocol (MSTP) support, Power On Auto Provisioning (POAP), 3 fan trays, Side intake airflow, Virtual Extensible LAN (VXLAN), Source-Specific Multicast (SSM), Access Control List (ACL) support, MACsec support
• Type :100 Gigabit QSFP28 / 40 Gigabit QSFP28
• Interfaces :1 x management RJ-45, 1 x USB, 36 x 100Gbit/40Gbit LAN QSFP28, 1 x management SFP+, 1 x serial (RS-232)
• Type :Internal power supply
• Power Redundancy :Optional
• Installed Qty :0
• Max Supported Qty :2
• Nominal Voltage :AC 120/230 V
• Frequency Required :50/60 hertz
• Power Consumption Operational :777 watt
• Dimensions & Weight
• Width :17.3 inch
• Depth :24.5 inch
• Height :1.7 inch
• Weight :18.74 lbs

• The Cisco Nexus 93360YC-FX2 Leaf Switch is a 2-Rack-Unit (2RU) Leaf switch that supports 7.2 Tbps of bandwidth and 2.8 bpps across 96 fixed 10/25G SFP+ ports and 12 fixed 40/10G QSFP28 ports. The 96 ports of downlinks support 1/10/25-Gbps. The 12 uplinks ports can be configured as 40- and 100-Gbps ports, offering flexible migration options. The switch is ideal for a non-oversubscribed solution in a compact form factor. The switch has FC-FEC and RS-FEC enabled for 25Gbps support over longer distances.
• Main Features
• FX2
• Switch
• L3
• managed
• 96 x 1/10/25 Gigabit SFP+ + 12 x 40/100 Gigabit QSFP28
• rack-mountable
• Built-in Devices :128 GB SSD
• Installed Size :16 GB
• Capacity :SPAN sessions: 4, Port channels: 512, VLANs supported: 3967, NAT entries: 1023, HSRP groups: 490, Longest prefix match (LPM) routes: 896000, Multicast routes: 32000, ACL entries (ingress): 5000, MST instances: 64, ECMP paths: 64, IP host entries: 896000, ACL entries (egress): 2000, MAC addresses: 256000, Rapid Per-VLAN Spanning Tree Plus instances: 3967
• Form Factor :Rack-mountable
• Ports Qty :96
• Advanced Switching :Layer 3
• Routing Protocol :ECMP, RSVP, BGP, PIM-SM, MSDP, OSPF, EIGRP, RIP, RIP-2, Multiprotocol BGP, HSRP, MPLS
• Manageable :Yes
• Status Indicators :Status
• Features :Layer 3 switching, Open Shortest Path First (OSPF), 3 fans, Port-side exhaust (PSE), Multicast Source Discovery Protocol (MSDP), MPLS support, Virtual Extensible LAN (VXLAN), MACsec support, Source-Specific Multicast (SSM), Access Control List (ACL) support, Virtual PortChannel (vPC) technology, 40MB system buffer, Spanning Tree Protocol (STP) support, Power On Auto Provisioning (POAP), Ethernet Virtual Private Network (EVPN), Multiple Spanning Tree Protocol (MSTP) support
• Interfaces :1 x management SFP+, 12 x 100Gbit/40Gbit LAN QSFP28, 96 x 1/10/25Gbit LAN SFP+, 1 x serial (RS-232), 1 x USB, 1 x management RJ-45
• Ports Type :40/100 Gigabit QSFP28
• Dimensions & Weight
• Width :17.4 inch
• Depth :22.9 inch
• Height :3.4 inch

• The Cisco Nexus 92304QC switch (N9K-C92304QC) is a 2-RU switch with the following ports:
• 56 fixed 40-Gigabit QSFP+ (optical) interface ports supporting 1-, 10-, and 40-Gigabit speeds
• 16 of these ports support breakout cables for connections to 64 1- and 10-Gigabit ports on other devices.
• 8 QSFP28 ports supporting 40- and 100-Gigabit speeds
• 1 console port
• 1 management port
• 2 software-defined ports (labeled as S1-65 and S1-66)
• 1 USB port

N9K-C92160YC-X is one of the Cisco Nexus 9200 switches. 92160YC-X Switch is optimized for Cisco NX-OS deployments. It provides 48 1/10/25-
Gb host ports and up to six hybrid uplink ports that can be configured as 10, 25, 40, or 100-Gb ports. With 3.2 Tbps of switching capacity, the
92160YC-X delivers line-rate Layer 2 and 3 features for demanding enterprise, service provider hosting, and cloud computing environments.

Key Features

The main features of the Cisco MGX 8950 OC-192c/STM-64 ATM Switch Service Module are listed here.
Full nonblocking, full-duplex line-rate throughput

High reliability with hot-standby 1+1 ATM switch service module card redundancy

Per-virtual-path and per-virtual-circuit traffic shaping and available bit rate (ABR) with virtual source and virtual destination

Up to 4 million cell buffers

Up to 16 classes of service (CoS) that can be used to support IP or ATM services

Support for standards-based Private Network-to-Network Interface (PNNI), switched virtual circuit (SVC) and switched virtual path (SVP),
soft permanent virtual connection (SPVC) and soft permanent virtual path (SPVP),
and Multiprotocol Label Switching (MPLS) services

Chassis Compatibility :
Cisco MGX 8950

Software Compatibility :
Cisco MGX Software Release 4.0.15 and above

Protocols :
ATM and SONET/SDH

Port Density :
1 port

Layer 1 (Physical Layer) Feature Summary
User-Network Interface (UNI) 3.0, 3.1, and 4.0 physical layer specifications
Compliance with the following SONET standards:
Bellcore GR-253-CORE
ANSI T1.105
Compliance with the following SDH standards:
ITU-T G.707, G.708, G.709, and G.783
ITU-T G.957 and G.958
Additional Physical Layer Specifications for Ports and Optics

Network Management :
Managed by Cisco WAN Manager software suite
Based on Simple Network Management Protocol (SNMP)

Power :
Input power required: -48 VDC
Power consumption: 205W

Physical Dimensions :
H x D: 15.83 x 15.65 in. (40.20 x 39.75 cm)

Weight :
6.5 lb (2.95 kg)

AXSM can be used in the MGX 8850 to provide ATM capability up to OC-48c/STM-16.
High scalability in interface speeds with T3/E3 ports, OC-3c/STM-1, OC-12c/STM-4, and OC-48c/ STM-16 AXSM modules. Each port on the AXSM can be configured for either trunk or access applications.
Industry leading module port densities of 16 T3/E3 ports, 16 OC-3c/STM-1 ports, 4 OC-12c/STM-4 ports, and 1 OC-48c/ STM-16 port that can scale up to 12 OC-48c/STM-16 modules in each MGX 8850 Multiservice Switch. Each OC-48c/STM-16 delivers fully nonblocking, full duplex throughput, in which a connection can occupy the entire line rate.
Support for all ATM service classes, with up to 16 classes of service (CoS). Supports carrier-class implementation of standards-based PNNI, SVC/SVP, SPVC/SPVP, and MPLS services. Large cell buffers (one million cells), which help to maximize "goodput" performance during congestion, reducing the number of retransmits; the buffers are allocated dynamically, depending on connection resource needs, thereby optimizing use of system resources.
High reliability with hot-standby 1:1 AXSM card redundancy, 1:1 and 1+1 line redundancy using APS.

Ports and trunks supported on same AXSM module
User-Network Interface (UNI) Specifications 3.0, 3.1, 4.0

Network Management
Management using Cisco WAN Manager software suite
Based on Simple Network Management Protocol (SNMP)

Physical Specifications
Dimensions: (H x D) 15.83 x 15.65 in.

Electrical Specifications
Input power required: -48 VDC
Power consumption: 95W

• Performance: Line rate performance, 1.08Tbps switching throughput, up to 714 Million packets per second (Mpps), up to 9,416 byte jumbo frames, 32MB buffer size
• Interface configurations: 48x 10GBase T (RJ45)
• 6x 100GbE ports supporting various combinations of: Up to 6x 100GbE QSFP28 transceivers
• Up to 16x 25GbE SFP28 ports using special (QSFP28 to 4x SFP28) break out DAC or optics cable
• Up to 16x 10GbE SFP+ ports using special (QSFP28 to 4x SFP+) break out DAC or optics cable
• Management interfaces: 1x RJ45 Ethernet Management port
• 1x Mini USB (Type AB) serial console port
• 1x USB2.0 for mass storage access
• Cooling: Rear to front model, with five variable-speed hot swap fan modules that provide 4+1 redundancy
• Power: Dual hot swap internal power modules that provide 1+1 redundancy with 407W maximum consumption
• Network OS: ONIE (Open Network Install Environment)
• Limited Warranty: 3 year customer replaceable unit next business day with service and extensions available